NYS and NYC M/WBE Certified Contractor
When you’re pulling onto the Southern State after a 38-minute commute, the last thing you want is to walk into a kitchen that fights you. Cramped layout, cabinet doors that don’t close right, countertops that have seen better decades — it adds up. A kitchen renovation doesn’t just fix what’s broken. It changes how your whole evening feels.
Roosevelt’s housing stock is almost entirely post-war construction — Cape Cods and ranch homes built in the 1950s and ’60s with kitchens that were never designed for the way families actually live today. Small footprints, closed-off layouts, no island space, minimal storage. If your kitchen feels like it was designed for one person doing one thing at a time, that’s because it was. A properly redesigned kitchen opens that up — more counter space, a layout that lets two people work side by side, storage that actually fits how you cook.
There’s also the South Shore climate to think about. The humidity that comes off the water cycles hard through Roosevelt homes — wet summers, cold dry winters, and everything in between. That moisture warps cabinet boxes, cracks grout, and degrades laminate over time. When you invest in a kitchen remodel, the materials matter as much as the layout. The right cabinet construction, the right countertop surface, the right grout — these aren’t just aesthetic decisions. They’re the difference between a kitchen that holds up for 20 years and one that starts showing problems in five.
We’re a full-service remodeling contractor based in Nassau County, and we handle kitchen renovations in Roosevelt from the first conversation to the final walkthrough — design, demo, cabinets, countertops, plumbing coordination, electrical, and finishing. One contractor, one contract, one person who’s accountable for all of it.
We hold a Nassau County Home Improvement Contractor License — the county-specific credential required by the Nassau County Department of Consumer Affairs to legally perform this work in Roosevelt and throughout Nassau County. That’s not a technicality. It’s verifiable, it’s specific to this county, and it matters when you’re making a real investment in your home.
We’ve worked on post-war homes across Nassau County’s South Shore — the same Cape Cods and ranch homes that define Roosevelt’s neighborhoods. We know what these kitchens look like before we open the door, and we know exactly what it takes to bring them into this century without cutting corners on the work that doesn’t show.
It starts with a consultation where we walk the space with you. We look at your existing layout, talk through what’s working and what isn’t, and ask the questions that actually matter — how many people cook in this kitchen, what do you need more of, what’s driving you crazy right now. From there, we put together a scope of work and a clear estimate. No vague ranges, no bait-and-switch numbers after demo.
Once you’re ready to move forward, we handle the permitting through the Town of Hempstead’s Building Department. Any kitchen remodel in Roosevelt that involves electrical upgrades, plumbing relocation, or structural changes requires a permit — and we pull it. This protects you at resale, keeps your homeowner’s insurance valid during construction, and ensures the work is inspected and signed off properly. Skipping that step is one of the most common mistakes homeowners in Nassau County run into, and it’s one we won’t let happen on your project.
Because virtually every home in Roosevelt was built before 1978, we also follow EPA Lead-Safe certified work practices on every project. That means proper containment and cleanup protocols throughout the renovation — not just a mention in the contract. When the work is done, we do a full walkthrough with you before we consider the job complete. You sign off when you’re satisfied, not when it’s convenient for us.
Ready to get started?
A kitchen remodel with us covers the full scope — layout reconfiguration, cabinet installation, countertop replacement, backsplash, fixtures, and finish work. If your kitchen needs an open-concept conversion, we handle the structural side of that too. If it’s a cabinet renovation and new countertops, we can scope it that way. The project is built around what your kitchen actually needs, not a pre-set package that may or may not fit your home.
For Roosevelt’s post-war ranch and Cape Cod homes specifically, we focus on a few things that matter most in this housing type. Cabinet-to-ceiling storage makes a real difference in the small footprints these kitchens typically have. Layout changes that open the kitchen to the living area — removing a partial wall or widening a pass-through — transform how the space feels without requiring a full addition. And for countertops, we consistently recommend quartz over natural stone for South Shore homes because it handles the humidity without needing annual sealing and holds up to heavy daily use.
Every kitchen remodel we complete in Roosevelt is done with materials and methods suited to this climate and this housing stock. We’re not pulling the same approach we’d use on a new construction home in a different part of Nassau County. These are older homes with specific structural realities, and the work reflects that.
In most cases, yes — and it’s not something you want to skip. Roosevelt falls under the jurisdiction of the Town of Hempstead’s Building Department, which requires permits for any kitchen work that involves electrical changes, plumbing relocation, or structural modifications like removing a wall. Even if the visible work looks cosmetic, the moment you’re moving a sink, adding a circuit, or touching anything structural, you’re in permit territory.
The reason this matters so much in Roosevelt specifically is the age of the housing stock. These are 60- to 70-year-old homes, and unpermitted work in a post-war house is one of the most common red flags that comes up during a home inspection. With median home values in Roosevelt hitting $587,000 and rising, you’re protecting a real asset. Permitted work means the job was inspected, it was done to code, and you have documentation to prove it when it’s time to sell. We handle the permitting process on every qualifying project — it’s part of how we work, not an add-on.
The honest answer is that it depends on scope, but here’s a useful range for Roosevelt’s market. A cabinet renovation with new countertops, updated fixtures, and a backsplash — without changing the layout — typically runs in the $25,000 to $60,000 range for quality work. A full gut renovation that includes opening the layout, relocating plumbing, upgrading electrical, and installing all new finishes can run $60,000 to $120,000 depending on the size of the kitchen and the materials selected.
What drives cost in Roosevelt specifically is the age of the homes. When you open up a 1960s kitchen, you often find plumbing and electrical that needs to be brought up to current code before new work can go in. That’s a reality of working in this housing stock, and any contractor who doesn’t mention it upfront isn’t being straight with you. We scope projects thoroughly before we give you a number, so you’re not getting a lowball estimate that doubles after demo starts.
For a standard kitchen remodel in a Roosevelt home — cabinet replacement, countertops, new fixtures, and updated finishes without major structural changes — you’re typically looking at three to five weeks of active construction once materials are on-site. A full gut renovation that includes layout changes, plumbing relocation, and electrical upgrades can run six to ten weeks depending on the scope and inspection scheduling through the Town of Hempstead.
The part that surprises most homeowners is the lead time before construction starts. Cabinet orders typically take four to eight weeks from selection to delivery, and permit approval through the Town of Hempstead adds time to the front end of the project. So from the day you sign a contract to the day demo starts, you might be looking at six to ten weeks of planning and procurement. We walk you through the full timeline at the start of every project so you can plan around it — especially important if you have kids at home and need to set up a temporary cooking situation while the kitchen is out of commission.
Cabinet refacing means keeping your existing cabinet boxes in place and replacing only the doors, drawer fronts, and hardware — sometimes with a veneer applied to the visible frame. It’s less expensive and less disruptive than a full replacement, and it can look great when the underlying boxes are still structurally sound. Full cabinet replacement means removing everything down to the wall and starting fresh with new boxes, new doors, and new hardware.
In Roosevelt’s housing stock, full replacement is often the right call — and here’s why. The cabinet boxes in 1950s and 1960s homes have been absorbing South Shore humidity for decades. By the time you’re considering a renovation, the box construction is frequently compromised — warped, soft in spots, or showing moisture damage that refacing won’t fix. Covering a damaged box with a new door just delays the problem. When we assess your kitchen, we’ll tell you honestly which route makes sense for your specific cabinets. If refacing is genuinely the right answer, we’ll say so. If the boxes need to go, we’ll explain exactly why before we touch anything.
Based on what the Roosevelt market is doing right now, yes — and the numbers back it up. Median home prices in Roosevelt hit $587,000 as of December 2024, up 5.6% year over year. Four-bedroom homes appreciated 15% in a single year. A local Realtor who lives in the community described Roosevelt as a place that’s “almost unidentifiable” compared to 15 years ago.
Kitchen renovations consistently return among the highest ROI of any home improvement project in the Northeast — roughly 85 to 96 cents on the dollar at resale. But beyond the numbers, a properly updated kitchen is what buyers in this price range expect when they’re spending close to $600,000 on a home. An original 1960s kitchen in an otherwise well-maintained house is a negotiating point for buyers — and not in your favor. Investing in a kitchen remodel now, while the market is rising and you have equity to work with, is a financially sound decision. We’re happy to walk through the ROI conversation in more detail during a consultation.
In Nassau County, home improvement contractors are required to hold a license issued by the Nassau County Department of Consumer Affairs — this is a county-level license, separate from any statewide credential. A contractor licensed in Suffolk County is not automatically licensed to work in Roosevelt or anywhere else in Nassau County. You can verify any contractor’s Nassau County license directly through the Nassau County DCA’s online database using the contractor’s name or license number.
Beyond the county license, there are two other credentials worth asking about for any kitchen remodel in Roosevelt. First, EPA Lead-Safe Certification — federal law requires any contractor disturbing lead paint in a pre-1978 home to hold this certification and follow specific containment and cleanup protocols. Since virtually every home in Roosevelt was built before 1978, this applies to almost every kitchen remodel in the hamlet. Second, ask whether the contractor will pull the required permits through the Town of Hempstead. A contractor who suggests skipping permits to save time or money is putting your investment and your family at risk. We hold the Nassau County HIC license, are EPA Lead-Safe certified, and pull every permit required for the work we do. Ask us for our credentials — we’ll provide them without hesitation.
Local Resources
Useful Links
