NYS and NYC M/WBE Certified Contractor
Most homeowners call a contractor, get the visible damage patched, and move on — only to find mold in the walls three months later. In Elmont, that’s not a worst-case scenario. It’s a common one. The median home here was built in 1952, which means original insulation, aging framing, and wall assemblies that hold moisture long after the storm has passed. When water gets in through a damaged roof or a compromised window frame, it doesn’t announce itself. It travels.
When we do the job correctly, you’re not just getting the hole in your roof fixed. You’re getting a full picture of what happened — where the water went, what it touched, and what needs to come out before anything gets rebuilt. That means no mold surprise six weeks from now, no insurance dispute because the damage wasn’t properly documented, and no second contractor coming in to redo what the first one missed.
For Elmont homeowners specifically, there’s another layer most contractors don’t mention. Homes built before 1978 may contain lead paint, and homes built before 1980 may have asbestos in insulation, tile adhesives, or roofing materials. When storm damage opens up those walls, New York State law requires a licensed contractor to handle it. Getting that right from the start protects your home, your family, and your ability to file a clean insurance claim.
We’re a Nassau County-licensed restoration company serving Elmont and the surrounding communities — including Franklin Square, Valley Stream, and Floral Park — with the full credential stack required to handle what storm damage actually uncovers in this area. That means a Nassau County General Contractor license, NYS DOL Mold Remediation certification, NYS DOL Asbestos Handler certification, and USEPA Lead and RRP certifications. All in-house. We don’t subcontract the parts that matter most.
We’re also an NYS Office of General Services Approved Emergency Response Contractor — a government-level designation that no storm chaser showing up the day after a nor’easter can claim. It’s verified, it’s rare, and it means the state has already vetted our licensing, insurance, and operational standards before you ever made the call.
We operate 24/7, handle insurance billing directly, and bring industrial-grade equipment — thermal imaging cameras, commercial extractors, professional dehumidifiers — to every job. Not because it sounds impressive, but because it’s what actually finds the damage before it finds you.
The first step is stabilization. If your roof has been breached or a window has failed, we stop additional water from entering the structure. That might mean emergency tarping, board-up, or temporary weatherproofing — whatever it takes to close the opening before the next rain event. In Elmont, where nor’easters can stack back-to-back from October through March, that window matters.
Once the structure is secured, we perform a full assessment. This isn’t a visual walkthrough — it’s a thermal imaging scan combined with moisture readings throughout the affected areas. In a home built in the 1940s or 1950s, water intrusion behind original plaster walls or inside attic insulation won’t show up to the naked eye. Our equipment finds it. If asbestos-containing materials or lead paint are identified during the assessment, those are documented and handled under the appropriate NYS DOL and USEPA certifications before any demolition or rebuild work begins.
From there, water extraction, drying, and structural repairs proceed in the correct order — not the fastest order. The Town of Hempstead requires permits for structural repairs and roof replacements, and we handle that process as part of the job. When the work is complete, the documentation goes directly to your insurance company. You don’t have to manage the back-and-forth — that’s already handled.
Ready to get started?
Storm damage restoration in Elmont isn’t a one-size scope. A roof breach on an Alden Manor Cape Cod from 1947 is a different job than the same event on a newer build — and the difference matters legally, not just technically. Our process accounts for the age of the structure, the materials involved, and the full chain of damage from entry point to affected areas.
Every job includes emergency stabilization, thermal imaging assessment, moisture mapping, water extraction, structural drying, and complete rebuild to pre-loss condition. Where pre-1978 materials are involved — and in Elmont, that’s most of the housing stock — asbestos testing, lead-safe work practices, and proper remediation protocols are built into the scope, not treated as optional add-ons. Mold remediation under NYS Article 32 is handled in-house with a licensed assessor and licensed remediator, which is a legal requirement in New York State that many general contractors aren’t equipped to meet.
Insurance documentation, adjuster coordination, and direct billing are included as standard. For homeowners commuting into the city via the LIRR from Elmont Station or catching the Cross Island Parkway, not having to take days off work to manage a contractor and an insurance company simultaneously is a real difference. We handle both sides of that conversation.
Mold can begin growing within 24 to 48 hours of water intrusion — and in Elmont’s older housing stock, the conditions are often ideal for it to spread fast. Original insulation, aging wood framing, and plaster wall assemblies hold moisture longer than modern materials do. By the time you notice a musty smell or visible discoloration, the mold has typically been active for days or weeks already.
This is why the assessment step matters as much as the repair step. Thermal imaging and moisture readings identify where water traveled inside the structure — not just where it entered. If mold is found, New York State law under Article 32 of the Labor Law requires that both the assessment and remediation be performed by NYS DOL-licensed contractors. We hold both licenses, which means the full remediation can happen under one roof without bringing in a separate company and starting the coordination process over again.
In most cases, yes — but the coverage depends on the type of damage, the cause, and how the claim is documented. Standard homeowners insurance policies in Nassau County typically cover wind damage, roof breaches, fallen trees, and resulting interior water damage. What they often don’t cover without a separate rider is flooding from storm surge or ground-level water intrusion, which is a distinction that matters depending on how the water entered your home.
The documentation piece is where claims get complicated. Insurance companies require clear evidence of the damage, the cause, and the scope of repair needed. If the assessment was incomplete or the contractor didn’t document what was found before starting work, the insurer has room to dispute or reduce the payout. We document everything — thermal imaging results, moisture readings, material testing — and handle the billing and adjuster communication directly. You don’t have to become an expert in insurance language to get a fair outcome.
It does, and significantly. Homes built before 1978 may contain lead paint, and homes built before roughly 1980 may have asbestos in pipe insulation, floor tile adhesives, roof materials, or attic insulation. When storm damage opens up walls, ceilings, or roof assemblies in a home that age, those materials can be disturbed — and New York State law requires that a licensed contractor handle them properly. A general contractor without NYS DOL Asbestos Handler certification and USEPA Lead/RRP certification cannot legally perform that work.
In Elmont, where the median home was built in 1952 and close to half the housing stock predates 1950, this isn’t an edge case — it’s the norm. We hold all of the required certifications and handle asbestos and lead protocols in-house as part of the restoration scope. If you hire a contractor who doesn’t have these credentials and they disturb those materials without proper handling, you’re exposed to health risk and potential liability. It’s worth confirming credentials before any work begins.
Because Elmont is an unincorporated hamlet within the Town of Hempstead, all structural permits run through the Town of Hempstead Building Department — not a village or city office. Roof replacements, structural repairs, and any work that alters the building envelope typically require a building permit before work can begin. The permitting process adds a step, but it also protects you: permitted work is inspected, and that inspection record matters if you ever sell the home or file a future insurance claim.
We handle the permit process as part of the job. You don’t need to figure out which forms to file or which department to call — that’s managed on your behalf. It’s one less thing to deal with when you’re already navigating a damaged home, an insurance claim, and a commute that doesn’t pause because a storm came through.
The range is wide because the scope varies so much. According to Angi’s 2026 data, storm damage repair costs typically run between $2,641 and $22,127, with most homeowners paying around $12,331. Where your job lands in that range depends on the type of damage, how far the water traveled before it was stopped, whether hazardous materials are involved, and how quickly the response happened after the storm.
In Elmont, the age of the housing stock tends to push jobs toward the higher end of that range — not because the work is overpriced, but because older homes have more variables. A pre-1950 Cape Cod with original insulation and plaster walls requires more careful assessment and more precise remediation than a newer build. We bill insurance directly, which means you’re not fronting the cost and waiting for reimbursement. The insurer gets the documentation, the scope, and the invoice — and you get your home back.
A general contractor can handle the visible, structural repairs — replacing damaged framing, re-roofing, fixing siding. What they typically can’t do, unless they hold additional certifications, is legally perform mold remediation, asbestos abatement, or lead-safe renovation work in New York State. Those require separate NYS DOL and USEPA credentials that most general contractors don’t carry.
In Elmont, where the housing stock is predominantly pre-1978 and storm damage routinely leads into walls, attics, and floor assemblies that contain older materials, the difference between a general contractor and a fully licensed restoration company is the difference between a partial fix and a complete one. We hold a Nassau County General Contractor license alongside NYS DOL Mold Remediation, NYS DOL Asbestos Handler, USEPA Lead, and USEPA RRP certifications. That means one company can legally handle the full scope — from the storm entry point to whatever it uncovers inside — without stopping the job to bring in a separate licensed subcontractor for the parts that require credentials.
Local Resources
Useful Links
