NYS and NYC M/WBE Certified Contractor
A storm hits, a tree limb comes through your roof in Roslyn Heights, and suddenly you’re managing three different phone calls — a roofer, a water extraction company, and someone your neighbor recommended for mold. That’s the version most homeowners end up in. It costs more, takes longer, and leaves gaps nobody owns.
When one licensed contractor handles the full scope — structural repair, water extraction, mold prevention, and hazardous material compliance — the job gets done without the gaps. No finger-pointing between vendors. No hidden damage discovered six months later when you’re trying to sell.
For Roslyn Heights specifically, that completeness matters more than it might somewhere else. The mature tree canopy here — especially near Christopher Morley Park — means fallen limbs are the most common entry point for storm water. And in a home built before 1978, which describes the majority of this hamlet, a disturbed wall or ceiling can mean asbestos or lead exposure that a general contractor alone isn’t legally allowed to handle. You get one company that covers all of it, start to finish, with the licenses to back it up.
We’re a Nassau County–based restoration contractor serving Roslyn Heights, all of Long Island, and New York City. The licenses aren’t a list we put on a website to look good — they’re what legally separates a complete job from a partial one. We hold NYS DOL Mold Remediation, NYS DOL Asbestos Handler, USEPA Lead and RRP certifications, and Nassau County General Contractor licensure. For a home built in the 1950s in Roslyn Heights, that full stack isn’t optional — it’s the legal baseline for doing the work correctly.
Beyond licensing, we’re approved as a NYS Office of General Services Emergency Response Contractor. That’s a state-level vetting process that happens before you ever call — not a badge handed out at sign-up. When you’re managing a damaged home in the Town of North Hempstead and trying to figure out who to trust, that credential matters.
When you call, someone answers — it doesn’t matter if it’s 2 AM the night after a nor’easter or a Sunday afternoon in August. The first step is getting to your property fast, securing any open breach, and stopping additional water from entering. That part is non-negotiable. Every hour a roof or wall is open is another hour water is moving somewhere you can’t see it.
From there, the assessment goes deeper than what’s visible. We use industrial thermal imaging cameras to identify moisture inside wall cavities and structural voids — the kind of water intrusion that looks fine on the surface but is already feeding mold growth behind your drywall. In a Roslyn Heights home with 1950s-era insulation and framing, that hidden moisture is exactly where the expensive problems come from.
Once the full scope is documented, we handle the insurance coordination directly — submitting documentation, working with your adjuster, and billing the carrier. For homeowners catching the LIRR into the city every morning, that means the claim moves forward while you’re at work, not because of it. Structural repairs, remediation, and any required Town of North Hempstead building permits are all handled in-house, so there’s no point where the job gets handed off to someone else.
Ready to get started?
Storm damage restoration in Roslyn Heights covers more ground than most homeowners expect going in. The visible damage — a broken shingle, a cracked soffit, a flooded basement — is the starting point, not the full picture. What we actually deliver is the complete chain: emergency property securing, debris removal, water extraction, structural drying, mold remediation, asbestos and lead compliance where required, full structural repair, and final inspection sign-off.
The hazardous material piece is worth understanding clearly. New York State requires a separate NYS DOL Mold Remediation license for any mold work — and a NYS DOL Asbestos Handler license when storm damage disturbs asbestos-containing materials, which are present in the insulation, floor tiles, and roofing of most pre-1980 homes. A general contractor without those licenses cannot legally complete the job in most Roslyn Heights homes. We hold both, along with USEPA Lead and RRP certifications, so the work doesn’t stop partway through because the contractor hit a regulatory wall.
Repairs are also done with the next storm in mind — not just restoring what was there before, but using impact-resistant materials and reinforced installation where it makes sense. PSEG Long Island launched storm hardening upgrades specifically in Roslyn Heights in 2023 because this community’s infrastructure was taking above-average storm damage. The homes deserve the same standard of thinking.
In most cases, yes — and it’s something a lot of homeowners don’t think about until a contractor brings it up mid-job. The median construction year for homes in Roslyn Heights is 1955, and more than 80% of the housing stock was built before 1978. That means the majority of homes here contain materials — insulation, floor tiles, joint compound, roofing felt — that were commonly manufactured with asbestos or lead paint during that era.
When storm damage disturbs walls, ceilings, attic spaces, or roofing in these homes, New York State law requires a licensed NYS DOL Asbestos Handler and USEPA Lead/RRP certified contractor to proceed with the repair work. A general contractor without those credentials cannot legally do the full job. We hold both certifications, which means the restoration doesn’t get paused or handed off to a specialty subcontractor — it continues under one licensed team from start to finish.
Mold can begin developing within 24 to 48 hours of water intrusion — and that clock starts from the moment moisture enters, not from when you notice it. In a Roslyn Heights home with older construction and less modern vapor barriers, water moves fast through wall cavities and insulation. By the time visible mold appears, it’s typically been growing for days.
This is why the response window matters so much. A storm that comes through on a Tuesday while you’re commuting to the city can leave water sitting in your walls for 12 or more hours before you even see the damage. Our 24/7 availability isn’t just a convenience — it’s directly tied to preventing a $5,000 repair from becoming a $25,000 remediation. The faster the water is extracted and the structure is dried, the lower the probability that mold becomes part of the job at all.
For structural repairs — roof replacement, siding, anything affecting load-bearing elements — yes, you typically need a building permit from the Town of North Hempstead’s Building Department. Roslyn Heights falls under North Hempstead’s jurisdiction, not a village’s own building department, so permits are pulled through the town directly.
Skipping the permit process creates real problems down the road. Insurance companies can void coverage on unpermitted work, and when you go to sell a home in a market where buyers are paying over a million dollars, unpermitted repairs surface in inspections and complicate the transaction. We’re a licensed Nassau County General Contractor, so permits are handled correctly as part of the job — not something you need to track separately or worry about after the fact.
The range is wide because the scope varies so much. Typical roof and siding repairs after a storm run somewhere between $3,000 and $7,000. If water intrusion has reached the point of mold growth, or if structural elements need to be replaced, costs can climb to $25,000 or beyond. Severe structural damage — a large tree through a roof, for example — can reach $60,000 or more depending on what’s underneath.
For Roslyn Heights homeowners with homes valued above $1,000,000, the more relevant number is usually what delayed action costs versus what immediate response costs. A roof breach addressed within hours stays a roofing job. The same breach left for a week in a 1950s home with older insulation becomes a water damage, mold, and potentially asbestos job simultaneously. We document everything thoroughly for insurance purposes, bill the carrier directly, and work to maximize what your claim covers — so the out-of-pocket exposure is as low as it can legitimately be.
You usually can’t tell from a visual inspection alone — which is exactly the problem. Water travels through wall cavities, pools behind insulation, and saturates structural framing in ways that look completely normal on the surface. In older Roslyn Heights homes, where construction materials absorb moisture differently than modern builds, hidden water damage can sit undetected for weeks.
We use industrial thermal imaging cameras on every job. Thermal imaging detects temperature differentials inside walls and ceilings that indicate moisture presence — even when there’s nothing visible on the surface. It’s the difference between finding the problem now, when it’s manageable, and finding it later when mold remediation or structural repair is unavoidable. If your home took any kind of storm impact — a fallen limb, wind-driven rain, a compromised roof edge — a thermal inspection is the only way to know for certain what’s happening inside the structure.
Most standard homeowners insurance policies cover sudden and accidental storm damage — wind damage, fallen trees, roof breaches from hail or debris, and the resulting water intrusion. Nassau County has been included in multiple Governor-declared states of emergency for storm events, and after the August 2024 flash flooding, New York State made emergency repair assistance available specifically to Nassau County homeowners. So yes, the coverage framework exists — the question is how well the claim is documented and submitted.
Where homeowners lose money isn’t usually in the policy language — it’s in the documentation. An adjuster working from a quick walkthrough will often miss hidden damage that thermal imaging would catch. We document the full scope of damage before any repair work begins, coordinate directly with your insurance adjuster, and bill the carrier directly. That process tends to result in more complete claim settlements because the documentation is thorough and the scope is accurately represented from the start.
Local Resources
Useful Links
